Most of the users have come across the problem in which the Brother printer won’t turn on while trying to print any important documents on their device. As a result, the printer stops working properly and the situation is very frustrating. 

There are various reasons that can cause this error including damaged Power button, hardware problems, damaged cable, loose connection, paper jams or damaged ink cartridges, etc.  

How to Fix Brother Printer won’t Turn On?

Here we will be providing five detailed procedures to fix the issue of the Brother printer won’t turn on. So, follow and implement them accordingly as mentioned below and resolve this printer error:

Procedure 1 – Disconnect and Connect the Power Cable

The first thing that you should do is disconnect and connect the power cable from the printer. Sometimes, due to the loose connections can appear this error on the device. So, ensure that, the connections are properly connected to the printer as well as the power module. If not, then reconnect them. To do that follow these steps hereunder:

  1. Remove the cable from the Brother printer and also the power outlet. 
  2. Wait for a few seconds
  3. After that, connect the printer power cable to the power outlet and then press the Power button on the Brother printer to check if the power light indicator starts blinking or not. 

Recommended Service: Printer repair service Dubai

Procedure 2 – Check the Power Cable and Printer’s Power Button

Sometimes, the “Brother printer won’t turn on” error can occur if the power cable is damaged. Therefore, you should check if the power cable is damaged or not. Unplug the power cable from the power outlet and check for any noticeable damages. If you find any damage, then replace it as soon as possible.  

After checking the power cable, you need to check if the Brother printer’s Power button is damaged or not. If yes, then try to repair it immediately. 

Procedure 3 – Clean the Printer

Sometimes, if you encounter any short circuit there are changes that your cartridge is leaking. Thus, it recommended to clean it nicely. After doing this, check if the problem has been resolved or not.

Procedure 4 – Check the Cartridge & Print Head

Remove the Printhead and inspect the printhead. If the cartridge has dried and you are still printing documents and performing the printer cleaning cycle, the printer might overheat and the print nozzles can catch fire. 

So, take off the print head and disconnect the power for at least one hour. After one hour, switch on the printer without installing the print head. Once you are done, check if it solves the issue or not.

Also Read: Brother MFC-l2740DW Driver

Procedure 5 – Disconnect the USB

If the previous procedures did not help you then you can try to disconnect the USB connector, which is located at the back of the Brother printer. After disconnecting it, try to turn on the printer and check if the Brother printer opens and works normally. 

These were the five procedures in which you can easily resolve the issue of “Brother printer won’t turn on”. Go through these procedures carefully and perform them one by one to get rid of this problem on the device.