The Blue Screen of Death, also called BSoD, is a very bad problem and can happen any time and interrupt your work. When this error occurs the message of “Critical_Process_Died” shows up on the screen. The problem of “critical process died windows 10” is also called STOP codes or STOP errors. These are a part of the O.S. of WIndows since 1993 when Windows NT 3.1 was released. Many users consider it as the most annoying problem of the Windows, but, this helps to identify that some very critical system problem has occurred. With the help of this message, the O.S. prevents any further damage to the computer. 

The Reason for the “Windows 10 critical process died” problem to Occur

The O.S. of Windows makes sure that only the authorized applications are capable of accessing certain parts and data of the system. Critical_Process_Died error occurs only when some unauthorized modification to the data is detected by the Windows critical component. 

Most of the time, the primary cause for this Critical_Process_Died message is a driver which is affected by bugs. However, some of the time, the reason behind this problem is not that obvious. The critical process died windows 10 error has also occurred to users with all-new laptops. It can also occur on computers which have been running for years without any problem. Due to this reason, it is better to take a bigger approach while solving this problem. This will help to cover multiple causes at a single time.       

Solutions for the Error “stop code critical process died”

The given solutions will help you to address the issue of faulty storage devices to viruses and damaged system files to poorly written device drivers. All of these solutions are very easy to carry out and you will not face any problem even if you are not an expert in computers.

Clean Boot and Safe Mode

On the basis of how far into the system has the Critical_Process_Died error has gone, booting your PC may not be possible. This can happen if a corrupted driver has been initialized when the loading of Windows occurred. You will not be able to fix your computer if you are unable to log into your system. But there is away. By entering Safe Mode or doing a Clean Boot. 

Procedure for Entering Safe Mode

  1. First of all, you have to try booting your computer multiple times. You have to do this until three sets of options for booting appear on your screen.  
  2. After that, you have to press on the option of Troubleshoot. Now you will enter the Advanced Option.
  3. Within this option, you have to click on ‘Startup Settings’.
  4. Then, you have to press the button of Restart. 
  5. Lastly, you have to go to the option of Safe Mode and enable it.

So, when you will be able to log in to your system, then you will be able to do the Clean Boot. This will allow you to start the Windows with the help of a minimum number of drivers. 

Procedure for doing Clean Boot

  1. At first, you have to open the Start menu. Then, you have to write “msconfig”. 
  2. After that, you have to press Enter. This will open the application of System Configuration.
  3. Then, you have to enter the tab of Services. Here, you have to check the option of “Hide all Microsoft services”.
  4. Next, you have to enter the tab of “Startup”. Then, you have to press on the “Open Task Manager” option. 
  5. Here, you have to make all the services disabled. 
  6. Lastly, restart your PC. 

Both of these processes are only good for the temporary fix for the problem of critical process died Windows 10. After you have boot up your computer, you can apply the solutions to fix the problem permanently.

1. Doing a System Restore

If your computer was working fine before installing a new driver or an update, then the best and the simplest way of solving the “Windows critical process died” is to restore the computer back before the installation of drivers and updates. 

By identifying the software that is causing the problem, you can manually install it or go for a System Restore. This will take your system back before you have installed your driver or the updates. Windows keeps the backup of your computer before any major system changes or updates. 

So, follow the given steps to successfully do the Windows 10 System restore:-

  1. First of all, you have to click on Start. 
  2. After that, you have to write “system restore” in the search box.
  3. Now, you have to press on the option of “Create a restore point”.
  4. Then, you will see a dialog box to appear on the screen. Here, you will see all the available restore points. 
  5. From this list, you can select any restore point you like and then confirm your decision. 
  6. After that, you have to wait until Windows is done with making the changes.

This process will not delete any of your personal information, but it can delete some of your settings and applications. When you are doing a system restore, Windows 10 will show you the drivers and softwares that will be deleted. You can note down their name and then install them when the restoring process is completed. This process is most likely to solve your problem of “critical_process_died windows 10”. 

2. Driver Updates

Old drivers on your computer can cause destruction on your PC. There is some hardware whose manufactures offer very helpful software utilities that manage the update of the driver very effectively. However, most of the manufacturers leva the updating of the drivers to the users. 

Hence, whenever, you buy any software, you must go to their official website and check for any latest updates. If you see any beta drivers are available, you must avoid them at all cost. Also, the drivers which are unsigned and from some shady manufacturers should be avoided. 

With the help of Microsoft’s Driver Verifier, you will be able to monitor Windows graphic drivers and kernel-mode drivers. This will help you to detect any unauthorized actions or calls that can make your system corrupted. This utility is a part of Windows 10. You can find it by writing a “verifier” in the window of the Command Prompt.    

3. Test the Performance of your Hardware

When you have bought a new computer or assembled one yourself, you must always check its stability. You can do this by putting your computer through a heavy load. This can be done using tools doing a stress test. You can find many free stress test tools over the internet. If you see that your computer has sustained through the test, then your computer is good. However, if it fails, you can then do the load test on each component. This will tell you about which of the component is not being able to take the load. With all your hardware running correctly will reduce the chance of “windows stop code critical process died” from occurring.   

Conclusion

All these processes are very effective in solving the problem of “Windows 10 critical process died”. You can start by doing the first process. If you are unable to fix your problem, then you can move on to the next solution. This “BSOD critical process died” problem is very critical but the solution process is not that difficult. Use the above-discussed solutions and solve your problem of “critical_process_died Windows 10”.