Xfinity router is a very popular Modem as well as a WiFi router. It is basically designed to deliver enhanced coverage with advanced options. Besides that, Xfinity has put forward a variety of routers to choose from. 

There is no doubt that the Xfinity router login configuration takes a bit of time as you have to access the Firmware setting of the router and change some of the default settings. Then obviously you are here to get guidelines for the Xfinity modem login. So, you can go through the instructions and guidelines below to access Xfinity router.

How to Access the Xfinity Wireless Router?

You can check out the following instructions for the Xfinity router default login.

  • At first, connect the router to a power source. Then connect the router with your device by using an ethernet cable. However, you have to keep in mind that the router should be connected by wire connection with the PC. You might be thinking why? Because your connection should be flawless as well as without any network issues as the firmware information of the router is quite sensitive.
  • Now, in order to open the Xfinity router login page, first, connect the ethernet wire with the router as well as the LAN port. Once you have developed a good connection, an LED light will blink on both ends. Therefore, it ensures a stable and good connection.
  • After that, from the computer, open any browser and go to the Router’s login page. There you can simply type 10.0.0.1 and then hit the Enter button. In accordance with that when the page opens, you can provide default login credentials that are “admin” in both the Username and Password. This will now let you access the router login page and also let you access the firmware settings.
  • However, if you have already personalized your router login, then you can add your credentials. Then you have to click on Login
  • Although if Xfinity modem login, you have to follow the same process as above. Firstly open the browser and type 10.0.0.1 and then hit Enter. Following that, enter the credentials just like the router one.

Points to Remember:

However, there can always be some problems and some of the points that you need to remember the Xfinity router IP address. So here are some that you need to remember.

  • If you are unable to access the login page, be sure to check if the wires are connected properly. Also, make sure the LED will blink on both sides for the router. However, you may have bad internet connectivity because of which the issue is arising.
  • After the above process, if you still cannot open the login page, then the default IP address of your router might have changed. Therefore, if you want to find out what you can do to open this login page, then go through the below instructions:
  1. Just open Control Panel from the setting of the PC
  2. Then move to the Network and Sharing Center where you can get an established internet connection. 
  3. Now, you have to tap on the LAN link and in return, this will pop-up a small window. 
  4. Tap on the Details tab and find the Primary DNS gateway. Also, you should know that the current IP address of the router is the corresponding address. 
  5. Followingly, type the address in the URL bar of the browser. This will definitely open the login page of the Router.

Frequently Asked Questions:

Do you have to be an Xfinity Customer to access the WiFi?

You can go through the above instructions if you are an Xfinity user. However, if you are not its customer, then you can access the WiFi hotspot in three ways that are as follows:

  • Limited Complimentary Trail: In any Xfinity WiFi hotspot location where you can access the internet, visitors are allowed to use it for a limited period of time.
  • Demand Pass: Buy the Xfinity WiFi demand pass and use the WiFi for an hour, a week or for a month depending on your demand pass.
  • Featured Hotspot: You can find the location on your map by using the Xfinity app and then can access the Wi-Fi for a limited period of time.